Installation guide
98
HD NetVu Console
98
Alarm Settings
Note: Greyed menu option will be available if the mode is changed from Console to DVR
or Encoder, they are not available in the Console conguration. They are included for
reference only.
The Alarm Settings menus allow conguration of the unit’s alarm functionality. Individual alarm inputs
and alarm zones can be congured. Global relays can be activated and the Activity grid set up.
Refer to the individual menus for further details.
IMPORTANT: TheRecordSettingpageswillnotbeavailablewhenoperatinginConsole
mode.
The Inputs page allows conguration of alarm channels. Up to 4 alarm channels are available.
The Zone Input page enables the conguration of alarm zones. Up to 32 separate alarm zones can
be created.
The Zone Actions page enables actions such as Go to Preset to be allocated to alarm zones. Zones
can also be associated with a specic camera. On receipt of an alarm, images from the associated
(primary) camera will automatically be displayed in the Viewer menu.
The Masked Camera Det(ection) page allows cameras to generate an alarm if ‘masked’ , based on a
threshold contrast value and dwell time.
The Alarm Response page enables conguration of responses following an VMD/Activity
Detection trigger.
The Activity page allowed activation and conguration of the Activity feature on all video inputs. The
Activity feature enables cameras to automatically detect any movement/changes within the video
scene. This can trigger a number of operations such as FTP alarm notication or an increase in the
recording rate.
The VMD page enables the unit’s VMD (Video Motion Detection) to be set-up. VMD allows a camera
to automatically detect if there is any movement/changes within specic areas of the video scene.
The Global Actions page allows the two onboard relay connections and global relay settings to be
congured.