Installation guide

NV1

Installation Guide

RVRC

Note: Greyed menu option will be available if the mode is changed from Console to DVR

or Encoder, they are not available in the Console conguration. They are included for

reference only.

This menu allows a user to temporarily switch the unit’s system state into set/unset/override mode.

The user will be required to enter their name and also the intended override duration. The action will

be logged.

Note: Refer to the Schedule menu for details of how to congure Set, Unset and Override modes:

Record Settings->Schedule.

Current System Time The unit’s current date and time information will be displayed. This

will be logged with any override action.

Current PC Time The current date and time information of the PC currently being

used to view the webpages will be displayed. This will be logged

with any override action.

Current system state The current system state will be displayed i.e. Set, Unset

or Override.

Note: The system state names displayed here will depend on those entered via the Schedule

menu: Record Settings->Schedule.

Override duration (minutes) Enter a time period for the override procedure. After this time

period, the system state will return to that congured via the

Schedule menu (for the current time).

Enter Your Name Enter your recognised user name. This will be logged.

Force UNSET(Green) Select to switch to Unset mode.

Force SET (Yellow) Select to switch to Set mode.

Force OVERRIDE (Blue) Select to switch to Override mode.