Installation guide

94
HD NetVu Console
94
Enable-N/O Select if the Keyswitch is to be normally open (UNSET). Then
choose a contact to be used in a specic zone as the Keyswitch.
Enable-N/C Select if the Keyswitch is to be normally closed (SET). Then
choose a contact to be used in a specic zone as the Keyswitch.
Enable EOL Select to congure the Keyswitch for EOL. The End Of Line
(EOL) option enables the Keyswitch to detect any changes in the
electronic input resistance. A change outside the expected values
will result in a Tamper Alarm (short circuit or open circuit) being
detected and the system switching to alarm mode.
With Keyswitch Disabled
Day Species which Day of the week is being congured
NOTE: The next two descriptions utilise the standard name settings for the proles (SET, UNSET).
If these names have been changed on the ‘Schedule’ page, these menu options will display
the user congured names.
UNSET Time Species what time in format HH:MM the UNSET recording
settings, congured on the Prole Recording page, will become
operational
SET Time Species what time in format HH:MM the SET recording settings,
congured on the Prole Recording page, will become operational
Note: The arrow button displayed next to each textbox allows settings to be replicated for those
cameras listed below. This will only affect the adjacent option i.e. Mode arrow will replicate
the Mode setting to all cameras below the clicked arrow.
Note: To disable one day, set both times to 00.00. To have the prole recording all 24 hours of a
day, set both times to 24.00