Installation guide
93
NV1
Installation Guide
93
Setup
Note: Greyed menu option will be available if the mode is changed from Console to DVR
or Encoder, they are not available in the Console conguration. They are included for
reference only.
This menu allows the Schedule function to be congured. This enables the unit to automatically be
put into set/unset mode at specic times on specic days. This can help reduce unnecessary
alarm triggers.
Combining when the unit is in Set or Unset mode with different recording qualities and rates under
normal and alarm conditions gives a high degree of control in a range of situations.
Note: If Keyswitch is Enabled, the Day Time and Night Time options will not be displayed. The
additional Keyswitch options will instead be displayed.
Mode/Title Enables a name to be entered for Unset, Set and Override mode.
Note: Any changes to Mode titles here will affect the mode names displayed in the Prole Record,
IP Record and Zone Input menu pages.
Current Mode Shows the current timer mode according to the names entered in
the Mode/Title text boxes.
Day Time Enter the time (using the 24hr clock) when Unset mode will begin.
Night TIme Enter the time (using the 24hr clock) when Set mode will begin.
Keyswitch A Keyswitch can be used to switch the recording prole (Unset/
Set).
Note: When the Keyswitch option is set to ‘Enabled’. It is necessary to save (or exit and return to)
the menu. The additional Keyswitch options will then be displayed.