Installation guide
81
NV1
Installation Guide
81
Record Settings
Note: Greyed menu option will be available if the mode is changed from Console to DVR
or Encoder, they are not available in the Console conguration. They are included for
reference only.
The Record Settings menus allow conguration of the unit’s record functions. Record settings can
be congured for normal operation, on alarm, by schedule and for set holiday and weekend periods.
Selected video data can be saved and protected, refer to the individual menus for further details.
IMPORTANT: The Record Setting pages willnot be available when operating in Encoder mode.
The Default page allows the basic Recording settings to be edited.
The Prole Record page allows the recording conguration to be based on specic priorities. The
record rate and quality can be customised to respond appropriately to the alarms and time of day.
A high degree of control and exibility is possible using these options.
The JPEG Pre Trigger page allows conguration of the pre trigger feature (for cameras recording
JPEG mode only). When enabled, the pre-trigger feature will buffer and store alarm recording prior
to an event trigger
The Protect Video page allows previously recorded data to be protected and retained. If needed, all
recording can be halted and saved video deleted.
The AoE Setup page allows conguration of the units ATA over Ethernet (AoE) function. AoE is a
network protocol designed for simple high-performance access of storage devices over Ethernet
networks. Importantly the external storage device must be located on the same network as the unit.