Installation guide
80
HD NetVu Console
80
Unallocated Cams
Note: Greyed menu option will be available if the mode is changed from Console to DVR
or Encoder, they are not available in the Console conguration. They are included for
reference only.
Channels can be utilised by the BNC connections on the unit OR by the sockets on any connected
Layer3 Enhanced CCTV Switch. If an IP source is plugged into a channel occupied by a BNC
connection, the BNC will take priority and possess the channel, whilst the IP connection will be
added to the un-allocated list, allowing it to be tied to an available channel through this conguration
pages.
Similarly, if a BNC connection is assigned to an occupied IP channel, the IP camera will be ‘bumped’
onto this list.
Cameras can then be assigned to a free channel, or dismissed as no longer required. A dismissed
camera can be added back into the un-allocated list by refreshing the connection (unplugging it from
the switch, and plugging it back in again).
Assign to: Displays all available unassigned cameras.
Assign Assigns the associated IP stream to the selceted camera.
Remove Entry Deletes the associated IP stream from the unallocated cameras
list
CIP Settings (Red) Select to open the Closed IPTV->Settings page
Remove All (Green) Deletes all IP stream on the unallocated cameras list
Refresh (Purple) Refreshes the information on the current page.