Installation guide
77
NV1
Installation Guide
77
IP Stream Inputs
Note: Greyed menu option will be available if the mode is changed from Console to DVR
or Encoder, they are not available in the Console conguration. They are included for
reference only.
The IP Streams menu allows the selection of High, Medium and Low resolution settings for video
sources originating from a network based source i.e. IP Server. These streams are congured on
the remote device. This feature is predominately intended for use with 3rd party IP camera streams
(connected via the 3rd party IP camera unlock feature).
Note: The IP Stream needs to be set to Simple Streaming on Camera->Setup.
Note: There is only normal ‘non event’ recording for connected IP cameras.
Channel Select a camera channel for review and adjustment. Only those
cameras designated as ‘IP’ in the Camera Setup menu will be
available (Camera Settings->Camera Setup).
Copy to all Select this option to apply current settings to all
connected cameras.
The following options can be congured for Set, Unset and Override record proles when operating
under Normal (non Event) conditions. For information regarding record modes, refer to Conguration
Menu:Record Settings->Prole Record.
Comp Select image compression format (MPEG or JPEG).
Res For both MPEG and JPEG recording, select either High, Medium
or Low quality resolution settings.
Note: To view a local third party IP camera ‘live’, IP recording should be set to MPEG.