Installation guide
76
HD NetVu Console
76
Camera Overview
Note: Greyed menu option will be available if the mode is changed from Console to DVR
or Encoder, they are not available in the Console conguration. They are included for
reference only.
This menu details the general settings assigned to each of the local camera channels.
To edit the settings assigned to any of these cameras:
Click on Local Camera Setup to edit the settings held in the SD Advanced.
Click on ‘Setup’ to open the Setup menu on the connected video source.
Note: The Layer3 Enhanced CCTV switch image will only be displayed when the unit is operating
within a Closed IPTV system.
CIP Settings (Red) Select to open the Closed IPTV->Settings page
Unalloc (Green) Select to open the Camera->Unallocated Cams page
Refresh (Purple) Refreshes the information on the current page.