Installation guide
71
NV1
Installation Guide
71
Camera Setup
Note: Greyed menu option will be available if the mode is changed from Console to DVR
or Encoder, they are not available in the Console conguration. They are included for
reference only.
This menu allows the conguration of active camera channels.
IMPORTANT: The menu options displayed will differ depending on the camera ‘Type’ and ‘IP
Mode’ selected.
Note: Ideally any setup options available locally on the camera should rst be used to best obtain
a suitable image quality.
Mono/Colour Camera
Load Video Window (grey) Press to initiate the applet to display the camera view.
Camera Select a camera channel for review and adjustment.
Camera Nuisance Count This is a repetitive detector value. When a camera failure alarm
is received on the unit, it will store the alarm time and monitor
the number of times the same alarm is triggered within an hour
period. If the detector is triggered the number of times entered
here, the unit will set the camera to ‘No Connection’. To disable
this feature, leave the setting as ‘0’.
Title Assign a recognisable name to the camera. This will be displayed
in all references to the camera in the both the Conguration and
Viewer menus.