Installation guide

61
NV1
Installation Guide
61
Viewer Defaults
This menu allows conguration of settings for the Viewer function. For more information regarding
this feature refer to ‘Operating The Viewer’.
Default settings can be congured for accessing the Viewer function via a local monitor and also
remotely via a network connection (settings can be optimised for either a LAN or WAN connection).
Default Full Req Images displayed full screen in the Viewer menus can be shown
in either High Medium or Low resolution.
Default Quad Req Images displayed in Quad format in the Viewer menus can be
displayed in either High Medium or Low resolution.
Default Multi Req Images displayed in Multi format in the Viewer menus can be
displayed in either High Medium or Low resolution.
Startup Multi Display When accessing the Viewer function, select the display format
which will initially be displayed.
Startup Multi Display When accessing the Viewer function, select the display format
which will initially be displayed.
Startup Camera When accessing the Viewer function, select the camera image
which will initially be displayed. If one of the multi display formats
has been selected via the ‘Startup Multi Display’ option, the
camera channel selected here will be displayed in rst (top
left) position. Subsequent camera channels will be displayed in
sequential order.