Installation guide
56
HD NetVu Console
56
Console Settings
The menus under the Console Settings heading allow the unit’s Viewer display settings to be altered
and User Account details to be viewed and changed.
IMPORTANT: The Console Setting pages will only be available when the unit is operating in
either ‘Console’ or ‘Server’ mode.
The Systems page dictates which cameras and systems the HD NetVu Console will connect to, and
controls how the video feeds will be displayed.
The Systems Overview page gives an overview of all connected cameras and their home servers
across all systems.
Note: The Systems Overview page can only be accessed if viewing the Conguration menus
remotely via an IP connection.
The Remote Monitors page allows monitors not physically connected to the unit to view camera
images received by the unit.
The Viewer Defaults page allows the Viewer menu settings to be congured.
The Display page controls how the local monitors present information. They control whether text
will be displayed on the Main or Spot monitors, the colour of that text, and how long cameras being
displayed in sequence will be shown on screen.
The Maps page allows images to be imported and used as maps displayed in the Viewer menus.
Hot spots can be added to allow quick navigation to individual cameras.
The Map Data page allows Map Cong information to be saved for future use. Previously saved
data can also be uploaded.
The User Accounts page helps protect conguration procedures by limiting access to specic users
via accounts and passwords.