Installation guide

51
NV1
Installation Guide
51
PowerScript Mgmt
This menu enables installed PowerScripts to be activated/deactivated on start-up. Use the
tickbox(es) to select/deselect installed PowerScripts, then select Save (Green). A system reset will
be required for the changes to take affect.
Note: Changes this page will alter the ‘Default.C’ le. If you already have a custom PowerScript
on your unit which uses Default.C, please contact Dedicated Micros Technical Support for
guidance Tel: [phone] for further guidance.
Reset (Red) Select to cycle the power to the unit.
Save (Green) Updates the DEFAULT.C le on the unit to enable selected scripts
on reboot.
Refresh (Purple) Refreshes the information on the current page.