Installation guide

46
HD NetVu Console
46
Video
Detected Video Standard The unit automatically detects the video standard being used i.e.
PAL/NTSC.
Video Resolution (h x v) Edit the resolution settings. This will be the default display
resolution when viewing the unit’s menu pages.
Deinterlace Filter When Enabled, this option will improve the appearance of moving
objects by applying a deinterlace mask that minimises the comb
effect that can be visible when recording high motion scenes in
4CIF mode. It is recommended that this option be enabled when
recording in 4CIF mode.
Disable Transcoding Select to disable the unit’s transcoding capabilities. In normal
circumstances this should always remain enabled, however it can
be useful to disable the feature when conducting maintenance.
Segment Aspect Ratio This setting control how a 4:3 image is displayed in a multi-screen
or wide screen format on the local viewer. The available display
segment changes depending on the number of multi screen
images selected for display.
Stretch forces the image to ll the available display segment. This
may result in some distortion of the display image.
Zoom Fit forces the frame to ll the available segment completely
and proportionally. Consequently some of the image at the top
and bottom of the frame may be cropped.
Frame Fit forces the frame to ll the available segment
proportionally, resulting in black bars left and right on some multi
display choices.
Note: There is no cropping or distortion on the recorded image, these settings are for display only.