Installation guide

45
NV1
Installation Guide
45
Network
Note: Greyed menu option will be available if the mode is changed from Console to DVR
or Encoder, they are not available in the Console conguration. They are included for
reference only.
Secondary Web Port If the default port setting for web serving has already been
allocated, it is possible to congure a second port number
i.e. the secondary web port can be set to 8000 if the default web
port (80) is blocked by the network or rewall.
Use Record Proles For Tx Select this option when units required Video Transmission prole
(rate/quality/resolution) is identical to that being recorded.
Max Client Connections This setting limits the number of client connections to the server.
The default value is 256 but could be increased if there is heavy
network trafc.
ARP Cache Size This setting limits the number of cache entries available in the
ARP table. The default setting of 256 is adequate for most
instances
TCP Reassembly Queue Limit This setting limits the maximum number of TCP segments
allowed in the reassembly queue, to protect against a common
DoS attack.
System (Red) Select to open the System->Features->System page
Network (Green) Select to open the System->Features->Network page
Video (Yellow) Select to open the System->Features->Video page
Other (Blue) Select to open the System->Features->Other page
Refresh (Purple) Refreshes the information on the current page.