Installation guide
39
NV1
Installation Guide
39
Serial Ports
This menu allows conguration of the unit’s Serial ports. For installation information, refer to the
optional stages in ‘Installing the Unit’.
Note: The Serial 1 port and the keyboard connector utilise the same 485 bus which can provide
either keyboard support or telemetry. NetVu Console defaults to keyboard operation.
Important: Conguring the Serial Port for Telemetry will disable the NetVu Console keyboard.
Serial Port These is one serial port available for conguration.
Port Cong The serial port can be congured to specic uses.
Select from:
None Switches port off
Debug Sets port for serial communications
PPP Sets port for Point to Point Protocol
Telem Sets port for Telemetry purposes
Comm Sets port for Comms purposes
EPOS Sets the serial port for connection to an
EPOS (Electronic Point Of Sale) device
Interface Type Choose the type of serial interface being used. Select from
RS232, RS485 or RS422.
Note: RS485 will only be available when ‘Enable RS485 Telemetry’ is selected in the
Features->System menu.
Important: Conguring the Serial Port for Telemetry will disable the NetVu Console keyboard.
Baud/Parity/Data/Stop/Flow Control
These options allow the Serial port communication settings to
be congured.