Installation guide

37
NV1
Installation Guide
37
Time and Date
This menu allows the time and date to be set on the unit. Required timezone information can also be
established and the unit time synchronised to that of the PC being used to view the webpages.
Note: If power is lost to the unit, time/date settings will be lost.
System Time The current system time and date is displayed.
Current Time Zone Displays the currently selected time zone settings.
Time Zone Select the relevant timezone offset from the accompanying drop
down menu.
Reset (Red) When a change has been made to the unit’s Time Zone
setting, it is necessary to reset the unit before the change will
take effect.
Date Format As default, the date is entered dd/mm/yy. It can also be displayed
as mm/dd/yy or yy/mm/dd.
Time Format As default, the time displayed is in 12 hour format. This can be
changed to 24 hour if required.
SNTP Server A Simple Network Time Protocol (SNTP) server allows external
devices to connect and set their current date and time settings to
that of the SNTP. If required, enter the SNTP server IP
address here.
Note: Dedicated Micros recommend the use of a SNTP Server.
Set Time Enter a current time for the unit.
Set Date Enter a current date for the unit.
Set Time (Green) When current time/date as been entered, select this button to
implement changes.