Installation guide
33
NV1
Installation Guide
33
Camcong Details Select to open the Camera Attributes menu. This menu provides
detailed information on the type of camera i.e. analog or IP and for
IP cameras, the supported resolution and capabilities.
Capabilities Select to open the Capabilities menu. This menu details the
function capabilities of your unit.
UI Information Select to open the UI (User Interface) menu. This menu details
basic information regarding your unit. The java applet path is also
shown. The default location will always be the applet installed on
the unit. If accessing multiple units via a remote connection, all
can be assigned the same Viewer applet. This will lessen the load
time required when accessing different DVRs/Servers. For further
guidance refer to the Viewer Defaults menu (Display Settings-
>Viewer Defaults).
Prole Record Tables Select to open the Prole Record Tables menu. This menu
thoroughly details the precongured recording settings.
Camera Overview Select to open the Camera Overview menu. This menu details the
general settings assigned to each of the local camera channels.
IP Network Load Select to open the IP Network Load menu. This page illustrates
the network trafc utilised by the unit. The page refreshes every
second.