Installation guide

NV1

Installation Guide

Alarm Status

Note: Greyed menu option will be available if the mode is changed from Console to DVR

or Encoder, they are not available in the Console conguration. They are included for

reference only.

This menu details information regarding the status of the unit’s alarm contacts, alarm zones and

relay outputs.

Alarm Contacts/Zones/Relay Outputs Alarm Contacts, Alarm Zones and Relay Outputs that are

in an ‘active’ state are shown light green. ‘In-active’ ones

appear dark green (not illuminated).

Alarms (Blue) Select to open to the Alarm->Inputs page

Refresh (Purple) Refreshes the information on the current page.