Installation guide

21
NV1
Installation Guide
21
COPY
Copy Button functionality for future development.
Pause In Live mode – Freeze the current display window.
In play mode – Pause video in playback.
Rewind When in Live mode – put unit into reverse playback from
current time.
When in Play mode – start rewinding from the playback time.
When in Rewind mode – increase speed of rewind.
When in Pause – Step back one frame.
Fast Forward When in Play or Rewind mode – start fast forwarding from the
playback time.
When in Fast Forward mode – increase speed of FF.
When in Pause – Step forward one frame.
Play When in Live mode – put unit into playback at the last
playback time stored. If no playback time then go back 10
seconds.
When in FF / REW / PAUSE – Initiate play at standard speed
from the elapsed time.
5
jkl
Numeric keypad Allows the entry of Camera, System and Preset numbers.
PRESET
Preset Sends the current camera to a preset position (if the camera
has presets stored). Press this button and then a numeric
key to select the required preset. The current camera is the
one shown top left in a quad or multiscreen view. This will self
cancel if no number keys are pressed.
SYSTEM
SELECT
System Select a System using this button to open the system select
function and press a numeric key, refer to ‘Using the NetVu
Console’. This will self cancel if no number keys are pressed.
Monitor Button functionality for future development.
Camera Revert numeric entry mode to selecting cameras.
Wash / Wipe Control of telemetry functions on the current base camera.
FOCUS
FAR
FOCUS
NEAR
Focus Far / Focus Near Control of telemetry functions.