Installation guide

15
NV1
Installation Guide
15
Connecting the HD NetVu Console
Step 1 - Connecting a Monitor
MON A
REMOTE
AUDIO OUT
AU
DIO IN
CAM 1
CAM 2
CAM 3
CAM 4
HDMI 1
USB
STAT
US
POWER
USB
USC
Connect a local monitor either to the BNC output labelled ‘MON A’ output or the HDMI output.
Note: Only one monitor connection is supported at any one time. The HDMI output will take
precedence should monitors be connected to both monitor outputs.
Note: This step is not required if the unit is congured as an Encoder, but it is recommended if the
unit will be congured locally.
Step 2 - Connecting the Keyboard
KBD
SERIAL 1
ALARMS/RELAYS
NET 1 NET 0 POE
PWR
IN
The HD NetVu Console interfaces with the NetVu Console keyboard via the RJ12 keyboard socket. The
keyboard can be used to control all servers linked to the NetVu Console.