Installation guide

HD NetVu Console

Rear Panel connections

Data

SERIAL 1 RS-232 / RS-485 / RS-422 (3 wire & 9 wire)

NET 1 RJ45 Ethernet network connector, 10/100 Mb/s Ethernet Network

NET 0 /POE RJ45 Ethernet network connector, 10/100 Mb/s Ethernet Network

/ Power Over Ethernet : IEEE 802.3-2008. End span and bridging

KBD RJ12 connector for NetVu Console Keyboard

Note: The Serial 1 port and the keyboard connector utilise the same 485 bus which can provide

either keyboard support or telemetry. Console mode uses to keyboard operation.

Alarms and relays

ALARMS Via 9 way (female) D Type 24V 200mA

4 General Alarm Inputs

Range of Alarm states are

i. 0 – 800R = Short circuit

ii. 800R – 2K = closed contact

iii. 2k – 12k = open contact

iv. > 12K = open circuit.

RELAYS Via 9 way (female) D Type rated at 24V 200mA

1 onboard light duty relay output (500mA@12V-48V Max)

Power

POWER 2-way terminal connector (DC) uses either external PSU provided

or POE (power over ethernet).