Installation guide
134
HD NetVu Console
134
Event Search
Note: Greyed menu option will be available if the mode is changed from Console to DVR
or Encoder, they are not available in the Console conguration. They are included for
reference only.
The Event Search menu allows recorded event images to be quickly searched for and reviewed.
The Search criteria can be limited to a specic date/time and/or individual cameras.
Note: Event Search will only be available when the ‘Enable Event Search Page’ option is enabled
via the System Settings->Features menu.
Event/Page Select the amount of event Still images (thumbnail size) to be
displayed per results page.
Start Date Enter a Start Date for the Event Search.
Start Time Enter a Start Time for the Event Search.
End Date Enter an End Date for the Event Search.
End Time Enter an End Time for the Event Search.
Cameras Select the camera channel(s) to be included in the Event Search.
A range of cameras can be selected by entering a hyphen
between the rst and last required camera i.e. 1-8. A selection of
individual cameras can be chosen by entering a comma between
each camera i.e. 1,3,5,8. Events captured by cameras not in this
selection will be ignored.
Search (Red) When the Event Search parameters have been entered,
select ‘Search’.
Refresh (Purple) Refreshes the information on the current page