Installation guide

129
NV1
Installation Guide
129
FTP Download
Note: Greyed menu option will be available if the mode is changed from Console to DVR
or Encoder, they are not available in the Console conguration. They are included for
reference only.
The unit can archive images to a central FTP (File Transfer Protocol) server. This could be on
receipt of an alarm, activation of the Activity Detection or at a scheduled time to backup recorded
video. Using FTP in a multi-unit application ensures that all les are stored in one central location for
each of the units, offering efcient le management and easy review capabilities.
FTP Server IP URL or name This is the IP address, URL or name of the FTP server the unit will
connect to for FTP image download purposes.
FTP Control Port The default port for FTP use is port 21. If this port has
already been allocated on the network, it is possible to identify
and allocate an alternative port.
Status Server Port Default The default port for the Server Status function is port 23, if this
port has already been allocated on the network, it is possible to
identify and allocate an alternative port number.
FTP Root Drive and Directory This is the directory where the images are to be stored, it is
recommended that a name associated with the unit be used for
ease of retrieval.
Username If it is necessary to use an authentication process to access the
FTP server, enter the relevant username here.
Password If it is necessary to use an authentication process to access the
FTP server, enter the relevant password here.