Installation guide
119
NV1
Installation Guide
119
Live Transmissions
Note: Greyed menu option will be available if the mode is changed from Console to DVR
or Encoder, they are not available in the Console conguration. They are included for
reference only.
The unit transmits live images using JPEG or MPEG formats.
The NetVu Connected remote viewing software will use the settings congured on this page as the
defaults for JPEG & MPEG; High, Medium and Low settings.
Filter by The resolutions available for selection will depend on the
camera types connected i.e. Standard Resolution or Megapixel
Resolution. Note that the Megapixel Resolution option will only be
available if a megapixel camera is connected.
IMPORTANT: There are three classications of IP camera:
1. Standard Resolution - QCIF,CIF,2CIF,4CIF
2. Standard Resolution (VGA) - VGA,SVGA,QVGA,Q2VGA
3. Megapixel - VGA,SVGA,UXGA,QVGA,Q2VGA,XGA,XGA+,SXGA+,QXGA
The classication of each connected camera channel can be viewed via the CamCong menu
(System Settings->Status->About->CamCong).
High LAN/Medium WAN/Low VLBR This shows the transmission settings congured for a High
quality LAN (Local Area Network) connection, Medium quality
WAN (Wide Area Network) connection or a Low quality VLBR
(Very Low Bit Rate connection).
Comp Settings can be established for JPEG and MPEG compression.