Installation guide
115
NV1
Installation Guide
115
Global Actions
Note: Greyed menu option will be available if the mode is changed from Console to DVR or
Encoder, they are not available in the Console conguration. They are for reference only.
This menu allows conguration of the default relay actions supported on the unit.
The unit supports one onboard relay connection and global relay settings. This global relay can be
triggered under specic conditions i.e. on receipt of any alarm or notication of Activity Detection.
Image Protection Period Select a time period (in days) that images associated with an
alarm will be protected from deletion.
Alarm Display Mode When a relay has been triggered, the primary camera associated
with that relay can immediately be displayed on the local monitor.
Select ‘Jump To Primary Camera’ from the drop down list to
activate this function.
Revert Display Mode Enable this setting to make the unit return to the view displayed
before the alarm activation once the alarm has ended.
Alarm Display Alert Enable this setting to display an alarm text alert in the colour
specied in ‘Alarm Colour’ in the Zone Actions Menu.
Normally Select if of the relay contact should normally be Open or Closed.
On Select to enable detection of the accompanying condition. Options
available are; VMD/Activity, Camera Fail, System Set, Dial Out,
System Override, Camera Masked, Is Recording, Not Recording
and HDD problem.
Contact Species which Relay will be triggered when the associated alarm
is received.