Installation guide
113
NV1
Installation Guide
113
VMD
Note: Greyed menu option will be available if the mode is changed from Console to DVR
or Encoder, they are not available in the Console conguration. They are included for
reference only.
The unit supports VMD (Video Motion Detection) on all video inputs and allows cameras to
automatically detect if there is any movement/changes within the video scene.
Note: Video Motion Detection enables a greater degree of control over detection settings and
conguration than the Activity Setup function. Each of the 16 VMD Zones can be directly
sized and congured to suit specic requirements. VMD can only be accessed and
congured remotely via the webpages.
Camera This is a drop down list of the video inputs on the unit, selecting
one of the inputs will display the corresponding video source.
Ensure this corresponds with the selected Channel.
Zone There are 16 VMD zones within the image that can be individually
congured, select the zone from the drop down list.
A selected zone can be re-sized by clicking the mouse button (use
the USB mouse if viewing on a local monitor) and then moving
and clicking the mouse again. A rectangle will then be displayed
based on these two selected points.