Installation guide
109
NV1
Installation Guide
109
Alarm Response
Note: Greyed menu option will be available if the mode is changed from Console to DVR
or Encoder, they are not available in the Console conguration. They are included for
reference only.
This menu enables response conguration following activity trigger on the camera channel.
VMD Pulse Extension The pulse extension extends the trigger period to avoid double
triggers of VMD occurring, i.e. If a second incident of VMD is
received, after the rst alarm is nished but within this period, the
unit will not create a new event.
Channel Select the camera input for conguration from the drop down list.
Detection Type Each camera input can be congured for either ‘VMD’ or ‘Activity’
detection. To assign no detection settings to the camera, select
‘None’
Note: Whichever Detection option is selected here, will result in the camera channel being only
available for editing in the relevant conguration menu i.e. if Activity is selected; this channel
can only be edited for Detection in the Activity Setup menu and not the VMD Conguration
menu.
Activity To Trigger Following Activity activation, select ‘Simple Response’ to trigger
specic chosen responses from the options detailed below. Select
‘Zone’ to apply the Zone Input rules as congured in the Zone
Input menu. Refer to ‘Zone Input’ for more information.
Note: When Activity to Trigger is set to ‘Zone’; the options detailed below are unavailable.
Create Database Entry When selected, an alarm entry will be added to the
Event database.