Setup guide

Dedicated Micros ©2006
8
Eco
Function Description
Pictures/Second / milliseconds This allows the record settings to be configured as either Pictures
Per Second or Milliseconds
Live/Record Resolution This is the resolution of the live and recorded images (MPEG only)
that will be transmitted from the unit and recorded to hard disk.
Image Size This is the file size for the image to be recorded, between 2KB &
45KB.
Video Expiry Period This indicates the maximum time any images can be stored on the
hard disk, if the record duration is greater than the video expiry
period the images will automatically be overwritten
Connected The unit can automatically detect if a camera source is present,
the corresponding input will be enabled in this menu for connected
cameras.
Title It is possible to allocate an ASCII camera title to each of the
cameras, which will be displayed onscreen along with the camera
number.
Alarm Input Polarity This can be set to Off, Normally Open (NO) or Normally Closed (NC).
Mono If the video input on the unit has a black and white (monochrome)
source connected then enable the corresponding camera.
The unit will try and compress the colour contents of the image if
this box is not enabled, ticking this box will remove unnecessary
overhead on the compression process.
Camera Fail Reporting If the video input on the unit does not identify a 1V peak-to-peak
signal then the unit can transmit an alarm notification email for
camera failure on the corresponding video input.