Setup guide

Dedicated Micros ©2006
27
Eco
Reviewing the Unit Logs
The unit can be configured to produce a number of log files.
6.00021
System Logs Setup
Configuration of these logs is detailed in the Configuration section of this manual. The logs that are
generated can be viewed via the web interface on the unit.
To access the logs:
1. Select Logs, to enable the logs select System Log Set-up enable the logs that are required
and select Save.
2. The logs can now be accessed these are:
System Logs Setup
e-mail Log
Logfile
Logfile Backup
Archive
3. To review the files select the corresponding option, the information will be displayed on
screen.
6.4001
E-mail Log
This log holds information on the e-mails sent from the unit on receipt of an alarm.
It follows the complete transaction from receipt of alarm to acknowledgement that the e-mail has been
sent and the SMTP link has been dropped.
The following shows a typical e-mail log, it contains the sending address, the recipient address, the
mail server information (IP address or name) and the reason for the mail, in this example Camera 3
has failed:
Sending message to [e-mail] at Wed Jun 30 14:21:26 2004 +0200
220 heron.jbloggs ESMTP Server (Microsoft Exchange Internet Mail Service 5.7.2653.13) ready
HELO DS2
250 OK
MAIL FROM:<DS2@DS2>
250 OK - mail from <DS2@DS2>
RCPT TO: <[e-mail]>
250 OK - Recipient <[e-mail]>
DATA
354 Send data. End with CRLF.CRLF
Date: Wed, 30 Jun 2004 14:21:32 +0200
X-Mailer: ADH SendMail V1.0