Setup guide

Eco

Tools

There are two tools that are supported on-board the unit itself, which can be accessed through the web

interface.

To access the Tools option:

1. Select the Conﬁguration option on the web interface.

2. Enter the username and password (default setting dm and web).

3. Select the Tools tab, the tools available are:

Camera Adjustment

Watermarking

5.1001

Camera Adjustment

This provides the Administrator the opportunity to adjust the colour and contrast settings for each

camera connected to the unit.

5.1002

Function Description

Camera This identiﬁes the video input number on the unit.

Title This identiﬁes the corresponding camera title allocated to the

video input.

Colour Select a value from the drop down list to select the colour level for

the video input.

Contrast Select a value from the drop down list to select the contrast level

for the video input.

5.5001

Watermarking

This option has already been covered in the Conﬁguration section of this manual; please refer to How

to Enable and Conﬁgure Watermarking for details of this option.

6.00011