Setup guide

Eco

Watermark step size This is the step size in bytes used when calculating the

watermark, if the step size is set to 1 then every byte in the in the

video partition will be part of the watermark calculation.

Note: The smaller the step size the more information that is to be

processed. The process time will increase, this is displayed in the

status bar.

Partition Information Summary This is the area when the partition information within the set time

and date will be displayed. Each partition can be selected by

highlighting the ﬁle.

Partition Info This button is selected for the unit to search for the partition

information within the set time and date. The partitions are then

displayed in the partition information summary area.Get Index info

This allows you to obtain the index information of the selecting

partition.

Watermark This will generate the unique MD5 signature for the selected

partition. This watermark can be used as part of the audit trail to

identify that the images have not been changed or tampered with.

Create Certiﬁcate Once the watermark has been generated this allows a certiﬁcate

with all the information on the watermark to be created, it is

possible to print this certiﬁcate.

4.90001

How to Enable and Conﬁgure PPP

The unit supports one serial port that can be conﬁgured for various operations, by default COM 1 is the

only enabled port and this is enabled for Debug.

To conﬁgure the serial ports:

1. Select System -> Serial Port

2. From the drop down list selected the relevant modem

3. Set the; baud rate, parity, Data bits, stop bits and ﬂow control for the serial device

connected to the unit.

Note: Refer to the manufacturer’s documentation for the correct settings.

4. Remember to save the conﬁguration by selecting Save Settings

4.9002

Function Description

Port This identiﬁes the serial port that is being conﬁgured, the unit

supports one communications port which is defaulted for PPP

Baud Rate, Parity, These are the serial port settings for the peripheral device

Data Bits, Stop

Bits, Flow Control

4.91001