Setup guide

Dedicated Micros ©2006
23
Eco
7. If the Operator that is generating the watermark certificates is to be logged, enter the report
author information, this will be added to the certificate.
8. Enter the step size information; this identifies the ‘skip’ distance between bytes used in the
watermark calculations, default 256 bytes.
9. To generate the watermark codes that will be linked to the partition selected press the
watermark button.
Note: The smaller the step size the longer the calculation process. Do not press any buttons while
the unit is calculating. The progress of the process is displayed in the status bar.
10. When the watermark codes have been generated a certificate must be created by pressing
the create certificate button, this certificate should then be printed and archived. This should
form part of the customer security procedure regarding incidents.
4.7003
Function Description
Start Date and time This is the start time and date for the time period of interest.
End Date and time This is the end time and date for the time period of interest.
Report author This will identify the Operator or Administrator responsible for
generating the watermark certificate and can be used as part of
the audit trail.