Setup guide

Eco

How to Conﬁgure Activity Detection

The unit supports activity detection on all video inputs, which allows cameras to automatically detect if

there is any movement within the video scene.

This can then trigger a number of operations such as email an alarm notiﬁcation and increase camera

recording rate for the corresponding video input.

Conﬁguration will be separated into two sections:

Enabling video inputs

Setting up the detection area

3.2104

To set up each camera with a grid:

1. Select Alarms/Activity -> Activity Detection

2. Enable All or individual inputs for Activity

Function Description

Activity Camera Enable This option will enable ACT on the adjacent camera. Tick the box

that corresponds to the input to have ACT enabled

3. Click on ‘Click here to see Activity’ to display the video image and grid. By default, video

input 1 will be displayed and the grid is divided into 16x16 zones

4. Select the video input you are conﬁguring from the drop down menu

5. If the default areas are not positioned correctly there is an option to clear all cells

6. Click on individual cells to make detection active. Click again to make the zone inactive.

7. If you want to use the default zone settings, select the default grid option to place 16x16

zones over the image.