Setup guide

Eco

Advanced Conﬁguration

3.00091

How to conﬁgure a Schedule

The On-board schedule function of the unit is designed to program recording rates. This makes it

possible to record at different rates depending on the time and day, saving disk space when a high rate

of recording is not necessary. These rates are set up on the Camera Set-up page.

To set up the Schedule function, we will use a typical example:

Monday to Friday Day recording settings in use from 08:30 until 18:30

Monday to Friday Night recording settings in use from 18:30 until 08:30

Weekend Saturday uses Day recording settings from 07:00 until 22:30,

Night recording from 22:30 until 10:00 on Sunday. Sunday records

using Day settings until 18:00, then switches to Night recording

until 08:30 on Monday.

3.00092

1. Enter 18:00 in the Night box adjacent to Sunday

2. Enter 10:00 in the Day box adjacent to Sunday

3. Enter 18:30 in the Night box adjacent to Monday through to Friday

4. Enter 08:30 in the Day box adjacent to Monday through to Friday

5. Enter 22:30 in the Night box adjacent to Saturday

6. Enter 07:00 in the Day box adjacent to Saturday

7. Alternatively, if the premises are vacant at the weekend and a different set of settings are

appropriate, enable the weekend settings and enter a time for the weekend to start and

end.

8. Enter the titles that will be associated with the operating modes

9. Save the conﬁguration by selecting Save Settings!

10. If times have been changed, press the Reset button to apply the changes.

3.00093