Operating instructions

Eco4

Live Transmissions

The unit transmits live images using JPEG or MPEG formats.

The NetVu Connected remote viewing software will use the settings congured on this page as the

defaults for JPEG & MPEG; High, Medium and Low settings.

Comp Settings can be established for JPEG and MPEG compression

Res

For MPEG and JPEG transmission, select image resolution

settings (2CIF, CIF or QCIF).

Size_rate For JPEG, the gure entered will be the size of the JPEG

transmitted (in Kbytes). For MPEG4 the gure will be the bit rate

allocated. A higher rate will provide better quality picture display.

JPEG le sizes can be congured in the range of 5-45Kbytes and

MPEG bit rates in the range of 45-2500Kbits/second.

PPS This shows the number of pictures transmitted per second.

For JPEG, the actual images transmitted will depend on the

bandwith of the link, increasing the pictures sent per millisecond

may introduce time lag if bandwith is not sufcient. On MPEG

transmission, increasing the pictures sent will also reduce the

quality of the images (as more images are transmitted for the

dened bit rate).

Intelligent Security & Fire Ltd