Operating instructions

Eco4

Global Actions

This menu allows conguration of the default relay actions supported on the unit.

The unit supports two onboard relay connect

ions and a global relay setting. This global relay can be

trigge

red under specic conditions i.e. on receipt of any zone alarm or notication of

Activity

Detection

Image Protection Period Select a time period (in days) that images associated with an

alarm will be protected from deletion.

Alarm Display Mode When a relay has been triggered, the primary camera associated

with that relay can immediately be displayed on the local monitor.

Select ‘Jump To Primary Camera’ from the drop down list to

activate this function.

Revert Display Mode Enable this setting to make the unit return to the view displayed

before the alarm activation once the alarm has ended.

Alarm Display Alert Enable this setting to display an alarm text alert in the colour

specied in ‘Alarm Colour’ in the Zone Actions Menu.

Normally Select whether the normal state of the relay contact should be

Open or Closed.

On Select to enable detection of the accompanying condition. Options

available are; Activity, Camera Fail, System Set, Dial Out, System

Override, Camera Masked and Is Recording,

Intelligent Security & Fire Ltd