Operating instructions

Eco4

Alarm Reporting This must be enabled for the unit to automatically connect

on alarm.

Alarm 24Hr This will ensure that Activity Detection is permanently enabled on

this camera channel.

Add Still Image This will record a still image of the trigger along with the standard

recording. This can then be sent on to an external destination.

Protect Alarm Images Select to automatically protect alarm images from

being overwritten.

Alarm Relay Select to trigger an alarm relay following zone activation. Select

the specic relay via the ‘Relay’ option.

Email Image If this option is selected, a JPEG will be added to the reporting

email (if Email Reporting is selected).

Enable in Day This will enable Activity Detection when the unit is in Day (Unset)

operation mode.

Note: This label (Day) may have been edited in Schedule->Setup.

Enable in Night This will enable Activity Detection when the unit is in Night (Set)

operation mode.

Note: This label (Night) may have been edited in Schedule->Setup.

Enable in Weekend This will enable Activity Detection when the unit is in Weekend

(Override) operation mode.

Note: This label (Weekend) may have been edited in Schedule->Setup.

Intelligent Security & Fire Ltd