Operating instructions
Dedicated Micros ©2011 MI-I-ECO4/E1-2
83
Eco4
Activity Response Setup
This menu enables response conguration following activity trigger on a selected camera channel.
Activity Pulse Ext (s) A pulse extension is used to prevent double triggers on a single
alarm. The pulse extension time starts on an alarm trigger. If that
contact is triggered again after the rst alarm has nished but
within the pulse extension, the second trigger will not generate a
new alarm, but will extend the current alarm duration. Enter the
time in seconds for this extension.
Channel Select the camera input for conguration from the drop down list.
Copy To All Select to copy the current Activity Response settings to all camera
channels.
Detection Type To congure the selected camera channel for Activity, select
‘Activity’. To assign no detection settings, select ‘None’.
Activity To Trigger Following Activity activation, select ‘Simple Response’ to trigger
specic chosen responses. Refer to ‘Activity Response Setup’ for
more information. Select ‘Zone’ to apply the Zone Input rules a
congured in the Zone Input menu, refer to ‘Zone Input’ for
more information.
Create Database Entry When selected, an alarm entry will be added to the
Event database.
Prole Change Select to enable the unit to switch from Normal to Event recording
following alarm activation.
Intelligent Security & Fire Ltd