Operating instructions
Dedicated Micros ©2011 MI-I-ECO4/E1-2
69
Eco4
To format additional Video Storage
1. Plug a USB storage device into one of the available USB ports and click the purple
Refresh button. The newly connected device will be displayed with a ‘/udd’ prex. The
SD card (if installed) will also be displayed and can be allocated in the same way. USB
devices will be prexed udd, SD cards will be prexed MDD.
2. The device may require formatting. DM recommends the device is formatted even if it
was previously been used as video storage. Click on the ‘Format’ button adjacent to the
device listing to prepare the device for recording.
3. Allocate the formatted and mounted storage for video storage by clicking on the
‘Allocate’ button. Allocation takes between a few seconds and a few minutes,
depending on the size of the drive, and the Feedback column will display information
about the allocation process. The unit will require a Reset once allocation is complete.
Note: The unit application drive is protected, if it is allocated the unit will only remove the video
folder. Formatting any other device will remove all data. In either case recording on the
system is halted while formatting and, if already allocated, the formatted device will be de-
allocated as a video storage device
Intelligent Security & Fire Ltd