Operating instructions

Eco4

Copy To Next Select to copy the current prole record settings to the next

camera channel.

Day/Night/Weekend Normal Shows the recording prole used by the camera if no Timed

Schedules are applied and the camera is operating under Normal

(non Event) conditions, refer to ‘Schedule’ for further information.

Day/Night/Weekend Event Shows the recording quality that will be used by the camera

during an Alarm or Event. Note that Set and Override schedules

will be used only when Timed Schedules are applied. Refer to

‘Schedule’ for further information.

Note: Day/Night/Weekend modes may have been renamed via Schedule->Setup.

Res Select image resolution format (QCIF, CIF, 2CIF).

Rate_kbps If MPEG4 is selected, the gure entered here will be the bit rate

allocated. A higher bit rate will provide better quality. MPEG bit

rates can be entered within the range of 45-2500K bits/second.

Size If JPEG is selected, the gure entered here will be the size of the

JPEG transmitted (in Kbytes). JPEG le sizes can be congured

within the range of 5-45Kbytes.

PPS Select the number of pictures recorded per second.

GOP If using MPEG4 recording, select the number of images recorded

within a GOP (Group of Pictures). A GOP consists of an I-Frame

(keyframe) and following P frames.

Note: The GOP is also the rewind interval and stop interval for MPEG recording playback.

Note: An MPEG I-frame is considerably larger than a P-frame. Therefore the lower the GOP ratio,

the higher the disk space required to store recorded images.

Intelligent Security & Fire Ltd