Operating instructions

Eco4

Advanced Record

Menu View Switch to the Simple Prole Record menu.

Global Comp Select a Global i.e. all cameras compression format

(MPEG or JPEG),

Note: When Advanced Record settings have been changed, it is not possible access the Simple

Record menu until the newly congured Advanced Record settings have been applied. To

do this, open the Record menu and select the ‘Save’ option. It will then be possible to return

Days Recording Displays the record duration possible using the current

conguration.

Turbo Mode Select to activate the Turbo mode function (see ‘What is Turbo

mode?’ for a description of Turbo mode and its benets).

Note: When Turbo mode is selected, there will be only ONE congurable Record Prole

across ALL cameras. The unit then matches the live transmission rate to the congured

record rate. This enables a ‘doubling’ of performance. Only the ‘Low’ and ‘Medium’

Live Transmission proles are available for conguration (Network Settings->Live

Transmissions). Low and Medium transmission settings are congurable to allow video

streaming over low bandwith IP connections and are limited to CIF for this purpose.

Channel Enables selection of a specic camera for editing.

J-PEG Pre-Trigger Rate (pps) Enabling the Pre-Trigger feature will buffer and store alarm

recording prior to an event trigger (in JPEG format). The gure

entered here is the maximum possible data (pps) that will be

stored prior to an event trigger.

Copy To End Select to copy the current prole record settings to all

camera channels.

Intelligent Security & Fire Ltd