Operating instructions

Eco4

Utilising USB Memory

1. Navigate to System -> Video Storage.

The Video Storage Allocation table displays drives that are available for video recording. Entries with the prex ‘/

HDD0’ indicate the units local hard drive (if installed), entries prexed by ‘/udd0’ are recordable media connected

to the unit via USB sockets, an entry prexed by ‘/mdd’ is the installed SD card.

1. Plug a USB storage device into one of the available USB ports and click the purple

Refresh button. The newly connected device will be displayed with a ‘/udd’ prex. The

SD card (if installed) will also be displayed and can be allocated in the same way. USB

devices will be prexed udd, SD cards will be prexed MDD.

2. The device may require formatting. DM recommends the device is formatted even if it

was previously been used as video storage. Click on the ‘Format’ button adjacent to the

device listing to prepare the device for recording.

Intelligent Security & Fire Ltd