Operating instructions

Eco4

System Settings

The menus under the System Settings heading allow the unit’s core settings to be viewed, changed

and the system software upgraded.

The System option displays details about the unit including the IP address, unit serial number, MAC

address and software version.

The Unit Status page displays information about the unit’s operating condition, shows how long the

unit has been operating and the reason for the last reset. It also shows camera status and displays

any failed cameras.

The Alarm Status page shows which contacts are open, which zones are in alarm and which relays

are operating.

The About page allows access to numerous system information pages.

The Logs page allows access to various system logs. All logs located within the log folder on the unit

will be available for viewing in text format.

The Language page allows the system language to be set. The language can also be changed for

the current session only.

The Time and Date page allows the unit time and date settings to be adjusted, including setting

the timezone.

The Serial Ports page allows each of the four serial ports to be individually congured for one of a

range of operations, including; debug, PPP and telemetry.

The Audio page shows the settings available for each of the audio channels and allows conguration

of audio quality.

The Features page allows control of the different features that are available within the software

including Email reporting, webcam support and control of the display resolution.

The Maintain page allows the current conguration to be saved, and for previously saved settings to

be loaded. It also enables easy upgrade of the system software.

The PowerScript Mgmt page allows installed PowerScripts to be activated/deactivated on start-up.

The USB Cong. page allows one of the units USB sockets to be used as an external storage

output. A high capacity USB device could then be connected and used to store recorded

video images.

Intelligent Security & Fire Ltd