Operating instructions
Dedicated Micros ©2011MI-I-ECO4/E1-2
12
Eco4
Installing the Eco4 Unit
Step 1 - Connecting Video
VID 1
USB 1
NET
MON
VID 4
VID 2
VID 3
12V DC
AUD
IN
AUD
OUT
ALARMS / RELAYS
VGA
COM1
USB 2
The unit supports up to 4 connected Video Inputs (dependant on model) via the 75Ω BNC
connectors. Connect cameras to the video inputs, starting from input 1.
5.12
Step 2 - Monitor
The unit supports a main monitor via ‘Mon’.
A monitor can also be connected via the VGA connector.
IMPORTANT NOTE
On initial boot, the unit will utilise the composite output (MON A) and display a request for conrmation that
the message can be seen. If no conrmation is received after 30 seconds, the unit will REBOOT and display a
similar message via the VGA output. If this message is not conrmed within 30 seconds, the unit will REBOOT
again and continue this cycle until a conrmation is received.
Intelligent Security & Fire Ltd