Operating instructions

109

Eco4

Program Page

The Program Menu page allows the PTZ conguration on the currently selected telemetry camera to

be accessed and congured.

Red Dome Select to display the Dome Menu page.

Green Store Use to save the current view as a Preset for this

camera. Press this button then a preset position.

To re-send the camera to this position, select

the camera, then press Next -> Preset -> (preset

number).

Note: When entering a new preset, any previous preset assigned to that number (for the same

camera) will be overwritten.

Yellow Select This option will send the camera to

the stored ‘Preset1’ position.

Blue Set Origin The Origin option allows a base position to

be established for the Oracle dome camera.

The camera will register this position as zero

degrees. Any command that sends the camera

to a coordinate will use this origin as its starting

point..

Note: This option is only available for Oracle dome cameras.

Purple Back Return to the ‘PTZ Program Option’ page.

Intelligent Security & Fire Ltd