Operating instructions

DV-IP RT

Remote Alarm Reporting This must be enabled for the unit to automatically connect

on alarm.

Remote Cam Fail Reporting Enabling this option ensures the unit reports camera failure on

any of the inputs to the RVRC.

Remote Startup Reporting This will send an alarm report when the unit starts up. Any system

resets will be identied.

ARC Ping Enabled Should the modem/router at the Alarm Receiving Centre be

dormant, the unit will ‘Ping’ the ARC prior to sending reporting

data.

Alarm Responder Port This species the network port number used for reporting to the

alarm server. In normal circumstances this should be left at the

default value (23).

Dial Retry Time (secs) If the initial connection attempt fails, the unit will wait for the

specied time period (in seconds) before attempting to re-connect.

Dial Count This identies the number of times the unit will attempt to connect

after a failed attempt. A setting of ‘0’ means no limit and the unit

will continue to try and connect until successful.