Operating instructions
Dedicated Micros ©2009
89
DV-IP RT
Live Transmissions
The unit transmits live images using JPEG or MPEG formats.
The NetVu Connected remote viewing software will use the settings congured on this page as the
defaults for JPEG & MPEG; High, Medium and Low settings.
High LAN/Medium WAN/Low VLBR
This shows the transmission settings congured for a High quality
LAN (Local Area Network) connection, Medium quality WAN
(Wide Area Network) connection or a Low quality VLBR (Very Low
Bit Rate connection).
Comp Settings can be established for JPEG and MPEG compression
.
Res
For MPEG and JPEG transmission, select image resolution
settings (4CIF, 2CIF, CIF or QCIF).
Size_rate For JPEG, the gure entered will be the size of the JPEG
transmitted (in Kbytes). For MPEG4 the gure will be the bit rate
allocated. A higher rate will provide better quality picture display.
JPEG le sizes can be congured in the range of 5-45Kbytes and
MPEG bit rates in the range of 45-2500Kbits/second.
ms This shows the number of pictures transmitted per millisecond.
For JPEG, the actual images transmitted will depend on the
bandwith of the link, increasing the pictures sent per millisecond
may introduce time lag if bandwith is not sufcient. On MPEG
transmission, increasing the pictures sent will also reduce the
quality of the images (as more images are transmitted for the
dened bit rate).