Operating instructions
Dedicated Micros ©2009
85
DV-IP RT
Network
This menu allows additional network settings to be congured if required. If utilising the 1Gb network
connection, enter address details via Network Settings:Gb Network.
Server Name This eld can be edited to allocate a name to the unit. This would
be used if accessing the unit via a Domain Name Server (DNS).
IP Address This is the IP address allocated to the unit.
Sub Net This is the subnet of the network were the unit is located.
Gateway This is the IP address of the default gateway (router).
Note: The above IP, Sub Net, and Gateway details relate to the 100baseT Network connection
accessed via network port 2 on the unit, labelled ‘NET 2’.
Primary DNS This is the primary DNS server IP address for applications utilising
domain names.
Max Transmission Rate This shows the maximum transmission speed for the network type
being used.
Force 10BaseT operation The unit supports 10 or 100BaseT half duplex transmission.
Selecting this option will force the unit to operate at a 10BaseT
connection.
Tx Image Buffers This is used in order to improve the picture delivery over Ethernet
when using a slow connection i.e. 256Kbps. A buffer setting of 1,2
or 3 is available.
Ethernet MTU This is the maximum transmit unit for the Ethernet packet. The
MTU is the largest physical packet size measured in bytes that the
network can transmit. By default this gure is set to 1500bytes.
Mx Transmission Timeout ms This is the time (in milliseconds) the unit will wait to re-send a
packet if an acknowledgement is not received.