Operating instructions

DV-IP RT

VMD Conguration

The unit supports VMD (Video Motion Detection) on all video inputs and allows cameras to

automatically detect if there is any movement/changes within the video scene.

Note:

Video Motion Detection enables a greater degree of control over detection settings and

conguration than the Activity Setup function. Each of the 16 VMD Zones can be directly

sized and congured to suit specic requirements. VMD can only be accessed and

congured remotely via the webpages.

Function Description

Camera This is a drop down list of the video inputs on the unit, selecting

one of the inputs will display the corresponding video source.

Ensure this corresponds with the selected Channel.

Zone There are 16 VMD zones within the image that can be individually

congured, select the zone from the drop down list.

A selected zone can be re-sized by clicking the mouse button (use

the USB mouse if viewing on a local monitor) and then moving

and clicking the mouse again. A rectangle will then be displayed

based on these two selected points.

Mode The zone mode identies when the reference image is taken for

triggering VMD. The options are:

Normal - The reference image is updated approx

every second. This will only allow small

changes in the scene without triggering