Operating instructions

DV-IP RT

VMD/Activity Response Setup

This menu enables response conguration following activity trigger on a selected camera channel.

Channel Select the camera input for conguration from the drop down list.

Detection Type Each camera input can be congured for either ‘VMD’ or ‘Activity’

detection. To assign no detection settings to the camera, select

‘None’

Note: Whichever Detection option is selected here, will result in the camera channel being only

available for editing in the relevant conguration menu i.e. if Activity is selected for Channel

this channel can only be edited for Detection in the Activity Setup menu and not the VMD

Conguration menu.

Activity To Trigger Following Activity activation, select ‘Simple Response’ to trigger

specic chosen responses from the options detailed below. Select

‘Zone’ to apply the Zone Input rules as congured in the Zone

Input menu. Refer to ‘Zone Input’ for more information.

Note: When Activity to Trigger is set to ‘Zone’; the options detailed below are unavailable.

Copy To All Select to copy the current Activity Response settings to all camera

channels.

Create Database Entry When selected, an alarm entry will be added to the

Event database.

Prole Change Select to enable the unit to switch from Normal to Event recording

following alarm activation.

Alarm Reporting This must be enabled for the unit to automatically connect

on alarm.

Alarm 24Hr This will ensure that Activity Detection is permanently enabled on

this camera channel.